Building Collapse Houston Construction Accident Lawyer

Building Collapse Houston Construction Accident Lawyer

Seeking a Free Consultation with one of Texas’ Houston Construction Accident Lawyers? Call the Houston Construction Accident Lawyer Reshard Alexander today at 713.766.3322.

Structural integrity and failure is an aspect of engineering which deals with the ability of a structure to support a designed structural load (weight, force, etc…) without breaking, and includes the study of past structural failures in order to prevent failures in future designs.

Structural integrity is the ability of an item—either a structural component or a structure consisting of many components—to hold together under a load, including its own weight, without breaking or deforming excessively. It assures that the construction will perform its designed function during reasonable use, for as long as its intended life span. Items are constructed with structural integrity to prevent catastrophic failure, which can result in injuries, severe damage, death, and/or monetary losses.

Structural failure refers to the loss of structural integrity, or the loss of load -carrying capacity in either a structural component, or the structure itself. Structural failure is initiated when a material is stressed beyond its strength limit, causing fracture or excessive deformations; one limit state that must be accounted for in structural design is ultimate failure strength. In a well- designed system, a localized failure should not cause immediate or even progressive collapse of the entire structure.

Seeking a Free Consultation with one of Texas’ Houston Construction Accident Lawyers? Call the Houston Construction Accident Lawyer Reshard Alexander today at 713.766.3322.

Defining structural integrity and building collapse

Structural integrity is the ability of a structure to withstand its intended loading without failing due to fracture, deformation, or fatigue. It is a concept often used in engineering to produce items that will serve their designed purposes and remain functional for a desired service life .

To construct an item with structural integrity, an engineer must first consider a material’s mechanical properties, such as toughnessstrength, weight, hardness, and elasticity, and then determine the size and shape necessary for the material to withstand the desired load for a long life. Since members can neither break nor bend excessively, they must be both stiff and tough. A very stiff material may resist bending, but unless it is sufficiently tough, it may have to be very large to support a load without breaking. On the other hand, a highly elastic material will bend under a load even if its high toughness prevents fracture.

Furthermore, each component’s integrity must correspond to its individual application in any load-bearing structure. Bridge supports need a high yield strength, whereas the bolts that hold them need good shear and tensile strength. Springs need good elasticity, but lathe tooling needs high rigidity. In addition, the entire structure must be able to support its load without its weakest links failing, as this can put more stress on other structural elements and lead to cascading failures.[1][2]

Seeking a Free Consultation with one of Texas’ Houston Construction Accident Lawyers? Call the Houston Construction Accident Lawyer Reshard Alexander today at 713.766.3322.

Types of Building Failure

Structural failure can occur from many types of problems, most of which are unique to different industries and structural types. However, most can be traced to one of five main causes.

  • The first is that the structure is not strong and tough enough to support the load, due to either its size, shape, or choice of material. If the structure or component is not strong enough, catastrophic failure can occur when the structure is stressed beyond its critical stress level.
  • The second type of failure is from fatigue or corrosion, caused by instability in the structure’s geometry, design or material properties. These failures usually begin when cracks form at stress points, such as squared corners or bolt holes too close to the material’s edge. These cracks grow as the material is repeatedly stressed and unloaded (cyclic loading), eventually reaching a critical length and causing the structure to suddenly fail under normal loading conditions.
  • The third type of failure is caused by manufacturing errors, including improper selection of materials, incorrect sizing, improper heat treating, failing to adhere to the design, or shoddy workmanship. This type of failure can occur at any time and is usually unpredictable.
  • The fourth type of failure is from the use of defective materials. This type of failure is also unpredictable, since the material may have been improperly manufactured or damaged from prior use.
  • The fifth cause of failure is from a lack of consideration of unexpected problems. This type of failure can be caused by events

Seeking a Free Consultation with one of Texas’ Houston Construction Accident Lawyers? Call the Houston Construction Accident Lawyer Reshard Alexander today at 713.766.3322.

Building Collapse Houston Construction Accident Lawyer

If you were seriously injured in a construction accident or other type of personal injury accident, contact Attorney Reshard Alexander at (713) 766-3322. You can also fill out our online contact form. Your initial consultation is always free, and you never pay attorney fees unless I recover compensation for you.

Winning Your Personal Injury Lawsuit Checklist

Houston Work Accident Law Links
Houston Construction Accident Lawyer
FELA Railroad Lawyer
Jones Act Lawyer
Refinery Accident Lawyer

Texas Construction Accident Law Links
Building Collapse
Crane Accident
Dumpster Accident
Electrocution Accident
Fall from Heights Accident
Falling Others & Site Debris Accident
Fire & Explosion
Forklift Accident
Heavy Equipment Accident
Machinery Accident
Ladder Accident
Nail Gun Accident
Run-Over By Operating Equipment
Scaffolding Accident
Welding Accident

Attorney Reshard AlexanderBig Rig Bull Texas Truck Accident Lawyer represents clients in all Texas counties, including: Harris County, Montgomery County, Fort Bend County, Brazoria County, Galveston County, Chambers County, Liberty County, Jefferson County, Grimes County, and Waller County; and all Texas cities, including: Houston, Aldine, Algoa, Alief, Alvin, Anahuac, Angleton, Atascocita, Bay City, Bayou Vista, Baytown, Bellaire, Brazoria, Brenham, Brookshire, Bryan, Cedar Creek, Waller County, Channelview, China TX, Clear Lake City, Cleveland TX, Clute, Columbus, College Station, Conroe, Crosby, Cypress, Dayton, Deer Park, Dickinson, Eagle Lake, East Bernard, Edna, El Campo, Elmgrove, Flatonia, Freeport, Fresno, Friendswood, Fulshear, Galena Park, Galveston, Ganada, Garden Villas, Hardin, Hempstead, Hillcrest, Hitchcock, Houston, Humble, Huntsville, Inez, Jacinto City, Jamaica Beach, Jersey Village, Katy, Kemah, Kingwood, La Marque, La Porte, La Salle, Lake Jackson, League City, Liberty TX, Liverpool, Livingston, Long Point, Louise, Longpoint, Lufkin, Magnolia, Meadows Place, Missouri City, Montgomery, Morgans Point, Moss Hill, Nacogdoches, Navasota, Nassau Bay, Needville, Pasadena TX, Pasdena, Pearland, Port Bolivar, Porter, Prairie View, Richmond, Rosenberg, Rosharon, San Leon, Seabrook, Schulenburg, Sealy, Shenandoah, Shoreacres, Southside Place, Spring, Spring Branch Stafford, Sugar Land, Sunny Side, Texas City, The Woodlands, Todd Mission, Tomball, Waller, Webster, West Columbia, Wharton, Willis, Winnie, and Woodlands.